Worthy.Bible » Parallel » 1 Kings » Chapter 7 » Verse 27-37

1 Kings 7:27-37 King James Version (KJV)

27 And he made ten bases of brass; four cubits was the length of one base, and four cubits the breadth thereof, and three cubits the height of it.

28 And the work of the bases was on this manner: they had borders, and the borders were between the ledges:

29 And on the borders that were between the ledges were lions, oxen, and cherubim: and upon the ledges there was a base above: and beneath the lions and oxen were certain additions made of thin work.

30 And every base had four brazen wheels, and plates of brass: and the four corners thereof had undersetters: under the laver were undersetters molten, at the side of every addition.

31 And the mouth of it within the chapiter and above was a cubit: but the mouth thereof was round after the work of the base, a cubit and an half: and also upon the mouth of it were gravings with their borders, foursquare, not round.

32 And under the borders were four wheels; and the axletrees of the wheels were joined to the base: and the height of a wheel was a cubit and half a cubit.

33 And the work of the wheels was like the work of a chariot wheel: their axletrees, and their naves, and their felloes, and their spokes, were all molten.

34 And there were four undersetters to the four corners of one base: and the undersetters were of the very base itself.

35 And in the top of the base was there a round compass of half a cubit high: and on the top of the base the ledges thereof and the borders thereof were of the same.

36 For on the plates of the ledges thereof, and on the borders thereof, he graved cherubim, lions, and palm trees, according to the proportion of every one, and additions round about.

37 After this manner he made the ten bases: all of them had one casting, one measure, and one size.


1 Kings 7:27-37 King James Version with Strong's Concordance (STRONG)

27 And he made H6213 ten H6235 bases H4350 of brass; H5178 four H702 cubits H520 was the length H753 of one H259 base, H4350 and four H702 cubits H520 the breadth H7341 thereof, and three H7969 cubits H520 the height H6967 of it.

28 And the work H4639 of the bases H4350 was on this manner: they had borders, H4526 and the borders H4526 were between the ledges: H7948

29 And on the borders H4526 that were between the ledges H7948 were lions, H738 oxen, H1241 and cherubims: H3742 and upon the ledges H7948 there was a base H3653 above: H4605 and beneath the lions H738 and oxen H1241 were certain additions H3914 made of thin H4174 work. H4639

30 And every H259 base H4350 had four H702 brasen H5178 wheels, H212 and plates H5633 of brass: H5178 and the four H702 corners H6471 thereof had undersetters: H3802 under the laver H3595 were undersetters H3802 molten, H3332 at the side H5676 of every H376 addition. H3914

31 And the mouth H6310 of it within H1004 the chapiter H3805 and above H4605 was a cubit: H520 but the mouth H6310 thereof was round H5696 after the work H4639 of the base, H3653 a cubit H520 and an half: H2677 and also upon the mouth H6310 of it were gravings H4734 with their borders, H4526 foursquare, H7251 not round. H5696

32 And under H8478 the borders H4526 were four H702 wheels; H212 and the axletrees H3027 of the wheels H212 were joined to the base: H4350 and the height H6967 of a H259 wheel H212 was a cubit H520 and half H2677 a cubit. H520

33 And the work H4639 of the wheels H212 was like the work H4639 of a chariot H4818 wheel: H212 their axletrees, H3027 and their naves, H1354 and their felloes, H2839 and their spokes, H2840 were all molten. H3332

34 And there were four H702 undersetters H3802 to the four H702 corners H6438 of one H259 base: H4350 and the undersetters H3802 were of the very base H4350 itself.

35 And in the top H7218 of the base H4350 was there a round H5696 compass H5439 of half H2677 a cubit H520 high: H6967 and on the top H7218 of the base H4350 the ledges H3027 thereof and the borders H4526 thereof were of the same.

36 For on the plates H3871 of the ledges H3027 thereof, and on the borders H4526 thereof, he graved H6605 cherubims, H3742 lions, H738 and palm trees, H8561 according to the proportion H4626 of every one, H376 and additions H3914 round about. H5439

37 After this manner he made H6213 the ten H6235 bases: H4350 all of them had one H259 casting, H4165 one H259 measure, H4060 and one H259 size. H7095


1 Kings 7:27-37 American Standard (ASV)

27 And he made the ten bases of brass; four cubits was the length of one base, and four cubits the breadth thereof, and three cubits the height of it.

28 And the work of the bases was on this manner: they had panels; and there were panels between the ledges;

29 and on the panels that were between the ledges were lions, oxen, and cherubim; and upon the ledges there was a pedestal above; and beneath the lions and oxen were wreaths of hanging work.

30 And every base had four brazen wheels, and axles of brass; and the four feet thereof had undersetters: beneath the laver were the undersetters molten, with wreaths at the side of each.

31 And the mouth of it within the capital and above was a cubit: and the mouth thereof was round after the work of a pedestal, a cubit and a half; and also upon the mouth of it were gravings, and their panels were foursquare, not round.

32 And the four wheels were underneath the panels; and the axletrees of the wheels were in the base: and the height of a wheel was a cubit and half a cubit.

33 And the work of the wheels was like the work of a chariot wheel: their axletrees, and their felloes, and their spokes, and their naves, were all molten.

34 And there were four undersetters at the four corners of each base: the undersetters thereof were of the base itself.

35 And in the top of the base was there a round compass half a cubit high; and on the top of the base the stays thereof and the panels thereof were of the same.

36 And on the plates of the stays thereof, and on the panels thereof, he graved cherubim, lions, and palm-trees, according to the space of each, with wreaths round about.

37 After this manner he made the ten bases: all of them had one casting, one measure, and one form.


1 Kings 7:27-37 Young's Literal Translation (YLT)

27 And he maketh the ten bases of brass; four by the cubit `is' the length of the one base, and four by the cubit its breadth, and three by the cubit its height.

28 And this `is' the work of the base: they have borders, and the borders `are' between the joinings;

29 and on the borders that `are' between the joinings `are' lions, oxen, and cherubs, and on the joinings a base above, and beneath the lions and the oxen `are' additions -- sloping work.

30 And four wheels of brass `are' to the one base, and axles of brass; and its four corners have shoulders -- under the laver `are' the molten shoulders, beside each addition.

31 And its mouth within the chapiter and above `is' by the cubit, and its mouth `is' round, the work of the base, a cubit and half a cubit; and also on its mouth `are' carvings and their borders, square, not round.

32 And the four wheels `are' under the borders, and the spokes of the wheels `are' in the base, and the height of the one wheel `is' a cubit and half a cubit.

33 And the work of the wheels `is' as the work of the wheel of a chariot, their spokes, and their axles, and their felloes, and their naves; the whole `is' molten.

34 And four shoulders `are' unto the four corners of the one base; out of the base `are' its shoulders.

35 And in the top of the base `is' the half of a cubit in the height all round about; and on the top of the base its spokes and its borders `are' of the same.

36 And he openeth on the tablets of its spokes, and on its borders, cherubs, lions, and palm-trees, according to the void space of each, and additions round about.

37 Thus he hath made the ten bases; one casting, one measure, one form, have they all.


1 Kings 7:27-37 Darby English Bible (DARBY)

27 And he made ten bases of brass: four cubits was the length of one base, and the breadth four cubits, and the height three cubits.

28 And the work of the bases was this: they had panels, and the panels were between the fillets.

29 And on the panels that were between the fillets were lions, oxen and cherubim; and over the fillets there was a base above; and beneath the lions and oxen were garlands of festoon-work.

30 And every base had four wheels of brass, and axles of brass; and on its four corners were shoulder-pieces: under the laver were shoulder-pieces molten, behind every garland.

31 And the mouth of it within the crown and above was a cubit; and its mouth was rounded, [as] the work of the base, a cubit and a half; and also upon its mouth was sculpture; but their panels were square, not round.

32 And the four wheels were under the panels; and the supports of the wheels were in the base; and the height of a wheel was a cubit and half a cubit.

33 And the work of the wheels was like the work of a chariot wheel: their supports, and their rims, and their spokes and their naves were all molten.

34 And there were four shoulder-pieces to the four corners of one base; of the base itself were its shoulder-pieces.

35 And in the top of the base there was a circular elevation of half a cubit round about; and on the top of the base its stays and its panels were of the same.

36 And he engraved on the plates of its stays and on its panels cherubim, lions and palm-trees, according to the space upon each; and garlands were round about.

37 After this [manner] he made the ten bases: all of them had one casting, one measure, one form.


1 Kings 7:27-37 World English Bible (WEB)

27 He made the ten bases of brass; four cubits was the length of one base, and four cubits the breadth of it, and three cubits the height of it.

28 The work of the bases was on this manner: they had panels; and there were panels between the ledges;

29 and on the panels that were between the ledges were lions, oxen, and cherubim; and on the ledges there was a pedestal above; and beneath the lions and oxen were wreaths of hanging work.

30 Every base had four brazen wheels, and axles of brass; and the four feet of it had supports: beneath the basin were the supports molten, with wreaths at the side of each.

31 The mouth of it within the capital and above was a cubit: and the mouth of it was round after the work of a pedestal, a cubit and a half; and also on the mouth of it were engravings, and their panels were foursquare, not round.

32 The four wheels were underneath the panels; and the axles of the wheels were in the base: and the height of a wheel was a cubit and half a cubit.

33 The work of the wheels was like the work of a chariot wheel: their axles, and their rims, and their spokes, and their naves, were all molten.

34 There were four supports at the four corners of each base: the supports of it were of the base itself.

35 In the top of the base was there a round compass half a cubit high; and on the top of the base the stays of it and the panels of it were of the same.

36 On the plates of the stays of it, and on the panels of it, he engraved cherubim, lions, and palm trees, according to the space of each, with wreaths round about.

37 After this manner he made the ten bases: all of them had one casting, one measure, and one form.


1 Kings 7:27-37 Bible in Basic English (BBE)

27 And he made ten wheeled bases of brass; every one four cubits long, four cubits wide, and three cubits high.

28 And the bases were made in this way; their sides were square, fixed in a framework;

29 And on the square sides between the frames were lions, oxen, and winged ones; and the same on the frame; and over and under the lions and the oxen and the winged ones were steps.

30 Every base had four wheels of brass, turning on brass rods, and their four angles had angle-plates under them; the angle-plates under the base were of metal, and there were ornaments at the side of every one.

31 The mouth of it inside the angle-plate was one cubit across; it was round like a pillar, a cubit and a half across; it had designs cut on it; the sides were square, not round.

32 The four wheels were under the frames, and the rods on which the wheels were fixed were in the base; the wheels were a cubit and a half high.

33 The wheels were made like carriage-wheels, the rods on which they were fixed, the parts forming their edges, their rods and the middle points of them, were all formed out of liquid metal.

34 And there were four angle-plates at the four angles of every base, forming part of the structure of the base.

35 And at the top of the base there was a round vessel, half a cubit high;

36 In the spaces of the flat sides and on the frames of them, he made designs of winged ones, lions, and palm-trees, with ornamented edges all round.

37 All the ten bases were made in this way, after the same design, of the same size and form.

Commentary on 1 Kings 7 Commentary Critical and Explanatory on the Whole Bible


CHAPTER 7

1Ki 7:1. Building of Solomon's House.

1. Solomon was building his own house thirteen years—The time occupied in building his palace was nearly double that spent in the erection of the temple [1Ki 6:38], because neither had there been the same previous preparations for it, nor was there the same urgency as in providing a place of worship, on which the national well-being so much depended.

1Ki 7:2-7. Of the House of Lebanon.

2. He built also the house of the forest of Lebanon—It is scarcely possible to determine whether this was a different edifice from the former, or whether his house, the house of the forest of Lebanon, and the one for Pharaoh's daughter, were not parts of one grand palace. As difficult is it to decide what was the origin of the name; some supposing it was so called because built on Lebanon; others, that it was in or near Jerusalem, but contained such a profuse supply of cedar columns as to have occasioned this peculiar designation. We have a similar peculiarity of name in the building called the East India house, though situated in London. The description is conformable to the arrangement of Eastern palaces. The building stood in the middle of a great oblong square, which was surrounded by an enclosing wall, against which the houses and offices of those attached to the court were built. The building itself was oblong, consisting of two square courts, flanking a large oblong hall which formed the center, and was one hundred cubits long, by fifty broad. This was properly the house of the forest of Lebanon, being the part where were the cedar pillars of this hall. In front was the porch of judgment, which was appropriated to the transaction of public business. On the one side of this great hall was the king's house; and on the other the harem or royal apartments for Pharaoh's daughter (Es 2:3, 9). This arrangement of the palace accords with the Oriental style of building, according to which a great mansion always consists of three divisions, or separate houses—all connected by doors and passages—the men dwelling at one extremity, the women of the family at the other, while public rooms occupy the central part of the building.

10. the foundation was of costly stones, even great stones—Enormous stones, corresponding exactly with the dimensions given, are found in Jerusalem at this day. Not only the walls from the foundation to the roof beams were built of large hewn stones, but the spacious court around the palace was also paved with great square stones.

12. for the inner court of the house of the Lord—should be, as in the inner court of the house of the Lord; the meaning is, that in this palace, as in the temple, rows of hewed stones and the cedar beams formed the enclosing wall.

1Ki 7:13-51. Hiram's Works.

13. Solomon sent and fetched Hiram out of Tyre—The Tyrians and other inhabitants on the Phœnician coast were the most renowned artists and workers in metal in the ancient world.

14. He was a widow's son of the tribe of Naphtali—In 2Ch 2:14 his mother is said to have been of the daughters of Dan. The apparent discrepancy may be reconciled thus: Hiram's mother, though belonging to the tribe of Dan, had been married to a Naphtalite, so that when married afterwards to a Tyrian, she might be described as a widow of the tribe of Naphtali. Or, if she was a native of the city Dan (Laish), she might be said to be of the daughters of Dan, as born in that place; and of the tribe of Naphtali, as really belonging to it.

a worker in brass—This refers particularly to the works described in this chapter. But in 2Ch 2:13 his artistic skill is represented as extending to a great variety of departments. In fact, he was appointed, from his great natural talents and acquired skill, to superintend the execution of all the works of art in the temple.

15-22. two pillars of brass of eighteen cubits high—They were made of the brass (bronze) which was taken from the king of Zobah (1Ch 18:8). In 2Ch 3:15 they are said to have been thirty-five cubits high. There, however, their joint lengths are given; whereas here the length of the pillars is given separately. Each pillar was seventeen and a half cubits long, which is stated, in round numbers, as eighteen. Their dimensions in English measure are as follows: The pillars without the capitals measured thirty-two and a half feet long, and seven feet diameter; and if hollow, as Whiston, in his translation of Josephus, thinks (Jer 52:21), the metal would be about three and a half inches thick; so that the whole casting of one pillar must have been from sixteen to twenty tons. The height of the capitals was eight and three-fourths feet; and, at the same thickness of metal, would not weigh less than seven or eight tons each. The nature of the workmanship in the finishing of these capitals is described (1Ki 7:17-22). The pillars, when set up, would stand forty feet in height [Napier, Metal].

17, 18. nets of checker work—that is, branch-work, resembling the branches of palm trees, and

wreaths of chain-work—that is, plaited in the form of a chain, composing a sort of crown or garland. Seven of these were wound in festoons on one capital, and over and underneath them were fringes, one hundred in a row. Two rows of pomegranates strung on chains (2Ch 3:16) ran round the capital (1Ki 7:42; compare 2Ch 4:12, 13; Jer 52:23), which, itself, was of a bowl-like or globular form (1Ki 7:41). These rows were designed to form a binding to the ornamental work—to keep it from falling asunder; and they were so placed as to be above the chain work, and below the place where the branch-work was.

19. lily work—beautiful ornaments, resembling the stalks, leaves, and blossoms of lilies—of large dimensions, as suited to the height of their position.

21. Jachin and … Boaz—These names were symbolical, and indicated the strength and stability—not so much of the material temple, for they were destroyed along with it (Jer 52:17), as of the spiritual kingdom of God, which was embodied in the temple.

23-26. he made a molten sea—In the tabernacle was no such vessel; the laver served the double purpose of washing the hands and feet of the priests as well as the parts of the sacrifices. But in the temple there were separate vessels provided for these offices. (See on 2Ch 4:6). The molten sea was an immense semicircular vase, measuring seventeen and a half feet in diameter, and being eight and three-fourths feet in depth. This, at three and a half inches in thickness, could not weigh less than from twenty-five to thirty tons in one solid casting—and held from sixteen thousand to twenty thousand gallons of water. [See on 2Ch 4:3.] The brim was all carved with lily work or flowers; and oxen were carved or cut on the outside all round, to the number of three hundred; and it stood on a pedestal of twelve oxen. These oxen must have been of considerable size, like the Assyrian bulls, so that their corresponding legs would give thickness or strength to support so great a weight for, when the vessel was filled with water, the whole weight would be about one hundred tons [Napier]. (See on 2Ch 4:3).

27-39. he made ten bases of brass—These were trucks or four-wheeled carriages, for the support and conveyance of the lavers. The description of their structure shows that they were elegantly fitted up and skilfully adapted to their purpose. They stood, not on the axles, but on four rests attached to the axles, so that the figured sides were considerably raised above the wheels. They were all exactly alike in form and size. The lavers which were borne upon them were vessels capable each of holding three hundred gallons of water, upwards of a ton weight. The whole, when full of water, would be no less than two tons [Napier].

40-45. And Hiram made the lavers, and the shovels, and the basins—These verses contain a general enumeration of Hiram's works, as well as those already mentioned as other minor things. The Tyrian artists are frequently mentioned by ancient authors as skilful artificers in fashioning and embossing metal cups and bowls; and we need not wonder, therefore, to find them employed by Solomon in making the golden and brazen utensils for his temple and palaces.

46. In the plain of Jordan did the king cast them—Zarthan, or Zaretan (Jos 3:16), or Zartanah (1Ki 4:12), or Zeredathah (2Ch 4:17), was on the bank of the Jordan in the territories of western Manasseh. Succoth was situated on the eastern side of Jordan, at the ford of the river near the mouth of the Jabbok. One reason assigned by commentators for the castings being made there is, that at such a distance from Jerusalem that city would not be annoyed by the smoke and noxious vapors necessarily occasioned by the process. [Note in Bagster's Bible.] But the true reason is to be found in the nature of the soil; Margin, "the thickness of the ground." That part of the Jordan valley abounds with marl. Clay and sand are the moulding material still used for bronze. Such large quantities of metal as one of these castings would contain could not be fused in one furnace, but would require a series of furnaces, especially for such a casting as the brazen sea—the whole series of furnaces being filled with metal, and fused at one time, and all tapped together, and the metal let run into the mould. Thus a national foundry was erected in the plain of Jordan [Napier].

48. the altar of gold—that is, the altar of incense.

49. candlesticks of pure gold—made, probably, according to the model of that in the tabernacle, which, along with the other articles of furniture, were deposited with due honor, as sacred relics, in the temple. But these seem not to have been used in the temple service; for Solomon made new lavers, tables, and candlesticks, ten of each. (See further regarding the dimensions and furniture of the temple, in 2Ch 3:1-5:14).